# Jimny V2 — dimensional design inputs

Research accessed 2026-09-13. Target: friend's **India five-door**, model year, trim and transmission unknown. This is a bounded evidence set, not a dimensional database or fit certification. All dimensions below are source-labelled, not inferred from exterior proportions.

## Most useful dimensions

| Input | Published value | Evidence quality / permitted use |
|---|---:|---|
| India exterior L × W × H | **3985 × 1645 × 1720 mm** | NEXA OEM brochure p10; length explicitly includes spare wheel **with cover**. Vehicle identification/context only.[1] |
| Wheelbase / unladen ground clearance | **2590 / 210 mm** | OEM exterior specifications, not interior fit inputs.[1] |
| India rear-seatback first / second positions, boot volume | **219 / 211 L** | OEM brochure; seat position changes capacity. Neither value defines a printable envelope.[1] |
| Rear seats folded, boot volume | **332 L** | OEM brochure, VDA method; not floor geometry.[1] |
| Five-door seat-up cargo floor depth | **590 mm** | TGR calls it “to base of rear seats”; NOMADE magazine diagram label 7 says floor length with four occupants. Medium confidence, overseas nominal reference.[2][9] |
| Five-door cargo width to sides | **1210 mm** | TGR “to sides” and magazine label 5. **Not established as minimum wheelarch width or full-height free width.**[2][9] |
| Cargo aperture upper / lower width | **1030 / 1015 mm** | Magazine labels 2/3 distinguish top and bottom; TGR gives range 1015–1030.[2][9] |
| Cargo aperture height / maximum interior height | **850 / 960 mm** | Printed nominal dimensions; not a collision-free box.[2][9] |
| Cargo floor depth, two occupants / rear seats folded | **1240 mm** | Overseas reference only; does not prove a flat floor.[2][9] |
| Cargo sill above ground | **765 mm** | Magazine label 4; loading access context, not a mating dimension.[9] |

**Cargo interpretation:** 590 × 1210 is a useful *planning reference*, not permission to make a 590 × 1210 rectangular rigid base. Neither source defines corner radii, wheelarch intrusions, trim taper, latch clearance, closed-tailgate clearance, or seatback clearance above floor level. Magazine identity/issue and measurement method are unknown; its numbers match TGR and may share provenance rather than independently corroborate each other. The image is a NOMADE magazine repost, not an owner claiming to measure an India car.[2][8][9]

## Front interior and accessories: do not confuse measurement types

| Reference | Actual published dimension | Compatibility and limitation |
|---|---|---|
| MOD Console Caddy, OzJimny | **230 × 150 × 150 mm**, called “Caddy Size” | Seller explicitly lists current 3- and 5-door / XL and no drilling or screwing. It is an accessory envelope with unspecified axis order, **not the stock console cavity or cup-holder base**.[4] |
| EXEA replacement center dash tray, Compass Auto Japan | **206 mm internal width at center × 79 mm long × 20 mm high** | Internal usable tray size, **not exterior size or stock opening/clip dimensions**. Seller lists “JC74, JB74, 64 RHD”; also says international compatibility is untested. Do not call it India-confirmed.[7] |
| Stock glovebox | **No reliable numerical interior geometry found** | India review only says documents/knick-knacks. Measure opening, interior taper, hinge/latch sweep and closed-lid clearance before CAD fit claims.[5] |
| Stock floor-console tray / cup holders | **No reliable numerical mating geometry found** | India review says under-AC space is smaller in MT than AT. Transmission must be confirmed; keep separate fit variants, not one assumed universal insert.[5] |
| Rear door pockets | **Do not assume existing pockets** | India review explicitly says none; front pockets described as wallet/phone-sized only, not measured.[5] |

**JB74 versus five-door discipline:** The TGR URL contains `2019-jimny-jb74w` but the page has explicitly separate 3-door and 5-door tables. Its 3-door **1300 mm side width / 241 mm seat-base depth / 981 mm folded depth** must not enter five-door CAD.[2] JC74/NOMADE and XL are useful overseas discovery labels, not confirmation of this friend's chassis designation.[4][7][9] Only the specific accessory listings above make cross-model fit claims; that cannot establish interchangeability of unrelated pockets, clips, screws, or cargo panels.[4][7]

## OEM mounting constraints — override seller styling ideas

The **India OEM owner's manual**, part **99011M80T00-74E**, May 2023, is available through a Team-BHP mirror. Treat it as OEM-authored text on a third-party host, and confirm the friend's exact handbook revision before installation.[6]

- **Reject any basket/bridge filling the gap between the passenger dashboard and ride-in assist grip.** Manual p7-13: “Do not put any objects between the passenger side of the dashboard and the ride-in assist grip.” It warns that airbag inflation can throw objects at the passenger.[6]
- **No attachments on airbag units or surrounding areas.** Manual p2-40 also warns against cup holders/hangers near doors on vehicles with side/curtain airbags. No numerical deployment exclusion zone was located; do not invent one.[6]
- **Glovebox must latch securely and stay closed while driving.** Preserve latch engagement, opening/closing sweep, and removal/service access; do not design an overfilled insert that props the lid open.[6]
- **Lidless storage must not hold items that can fall out while driving.** Manual p7-12 warns about objects reaching pedals and large objects in the instrument-panel tray affecting the passenger airbag. Retention is a safety requirement, not just anti-rattle styling.[6]
- No verified OEM organizer mounting coordinates, screw thread/pitch/depth, torque, trim-clip load rating, or approved printed-accessory load was found. A seller's no-drill statement is not crash-retention evidence.[4]

## Recommended CAD gate (design recommendations, not measured facts)

1. Proceed with **parametric visual prototypes**, labelled **measurement-required / unverified fit**. Do not advertise ready-to-print India fit.
2. Ask for model year, trim, MT/AT, and straight-on scaled photos of candidate recesses; obtain physical measurements rather than scaling a perspective photo or the exterior body.
3. For glovebox: measure width/depth at floor and intended rim height, lid-closed height at front/middle/rear, corner radii, taper, latch and hinge envelopes. Test a thin paper/card or printed perimeter gauge before a full organizer.
4. For console: measure actual recess/cup-holder diameter at several depths, spacing, taper and nearby geometry; test every gear, transfer lever, parking-brake position and seat travel with vehicle stationary. Exclude the passenger assist-grip gap.
5. For cargo: measure minimum width at the actual organizer height, both rear-seatback positions, minimum depth to **closed tailgate**, trim corners, access to latch/jack/seat latches and verified restraint points. Do not claim printed clips are cargo restraints.
6. P2S **256 mm cube** is user-provided build-volume context, not this research's vehicle measurement. Allow printer brim/support/assembly margin; split larger concepts. Neither 206 mm tray interior nor a 230 mm accessory envelope proves a one-piece mating design fits the car or printer.

## Coverage and artifacts

Exactly **10 search attempts**, **8 provider-success responses**, **2 provider failures**, with both failed topic lanes retried through broader queries. Direct extraction supplemented by local PDF/HTML parsing; a supplied Reddit lead was recovered separately. **23 exact-quote evidence rows** with URL, attribution, measurement type, confidence, dates and limitations are in `evidence-ledger.json` and `.csv`. Raw pages/PDFs and the magazine image/transcription are retained in `raw/`. Unknowns above remain unresolved, not evidence that dimensions do not exist.

## Sources

[1] https://www.nexaexperience.com/content/dam/msil/nexa/in/en/assets/cars/jimny/documents/NEXA-Jimny-Brochure.pdf
[2] https://teamghettoracing.com/vehicles/cars/2019-jimny-jb74w/specifications
[4] https://ozjimny.com/products/mod-caddy-box-system-jimny-models-2018-current-xl-5-door-glx-lite-3-door
[5] https://zigwheels.com/reviews-advice/reviews/maruti-suzuki-jimny-5-door-review-lovable-livable/49914
[6] https://www.team-bhp.com/forum/attachments/official-new-car-reviews/2475811d1689340559-maruti-jimny-review-jimny99011m80t0074eowners-manual.pdf
[7] https://compassauto.jp/products/exea-center-tray-jimny-2018
[8] https://www.reddit.com/r/Jimny/comments/1ofngfw/dimensions_for_5_door_nomade_xl
[9] https://i.redd.it/lgwd7zlka8xf1.jpeg