Test the interface.
Not the whole print.
Twelve small separate samples across all four mechanisms. The dovetail sweep uses 0.3 / 0.4 / 0.5 mm Y-coordinate expansion, not normal flank clearance. Print at 100% and review orientation/support needs. No physical or slicer validation is claimed.
Coupon assembly instructions · Measured digital checks · Editable coupon source
| Sample | Print orientation | Files |
|---|---|---|
| pod-1-male-c03 | Base on bed, rail up. | STEP STL |
| pod-1-female-c03 | Solid roof on bed, channel faces up; turn over to mate. | STEP STL |
| pod-2-male-c04 | Base on bed, rail up. | STEP STL |
| pod-2-female-c04 | Solid roof on bed, channel faces up; turn over to mate. | STEP STL |
| pod-3-male-c05 | Base on bed, rail up. | STEP STL |
| pod-3-female-c05 | Solid roof on bed, channel faces up; turn over to mate. | STEP STL |
| capsule-tab-2mm | Constant section end on bed; 12 mm original X becomes print Z. | STEP STL |
| capsule-ledge-04 | Inverted: broad ledge face on bed. Turn over to test. | STEP STL |
| swivel-sleeve-8mm | Axis vertical Z; flat annular foot on bed. Do not lay cylinder sideways. | STEP STL |
| swivel-bore-88mm | Axis vertical Z; flat annular foot on bed. Do not lay cylinder sideways. | STEP STL |
| cassette-runner | As exported, Z=0. Groove roof / rail overhang need slicer support review. | STEP STL |
| cassette-groove | As exported, Z=0. Groove roof / rail overhang need slicer support review. | STEP STL |
Use the complete source archive for the cassette coupon generator. Small loose pieces: keep away from children. Coupons do not establish heat resistance, automotive fit, stop strength, retention or wear.